CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
ethernet cfm mep
Create an MEP.
Syntax
ethernet cfm mep {up-mep | down-mep} domain {name | level} ma-
name name mepid mep-id
Parameters
[up-mep | down-
mep]
Specify whether the MEP is up or down facing.
• Up-MEP: monitors the forwarding path internal to a
bridge on the customer or provider edge; on Dell
Networking systems, the internal forwarding path is
effectively the switch fabric and forwarding engine.
• Down-MEP: monitors the forwarding path external to
another bridge.
domain [name |
level]
Enter the keyword domain and then enter the domain name
or domain level.
ma-name name Enter the keyword ma-name and then enter the name of the
maintenance association.
mepid mep-id Enter an MEP ID. The range is from 1 to 8191.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
802.1ag
185