CLI Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added the multi-auth option on the C-Series and S-
Series.
8.3.2.0 Added the single-host and multi-host options on the
C-Series, E-Series, and S-Series.
Usage Information
• Single-host mode authenticates only one host per authenticator port and drops
all other traffic on the port.
• Multi-host mode authenticates the first host to respond to an Identity Request
and then permits all other traffic on the port.
• Multi-supplicant mode authenticates every device attempting to connect to the
network on the authenticator port.
Related
Commands
• show dot1x interface — display the 802.1X configuration of an interface.
dot1x mac-auth-bypass
Enable MAC authentication bypass. If 802.1X times out because the host did not respond to the Identity
Request frame, Dell Networking OS attempts to authenticate the host based on its MAC address.
Syntax
dot1x mac-auth-bypass
To disable MAC authentication bypass on a port, use the no dot1x mac-auth-
bypass command.
Defaults Disabled
Command Modes INTERFACE
802.1X
207