Manualshelf

CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series
411412413414415416417418419420
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The bestpath router bgp configuration mode command changes the
default bestpath selection algorithm. The multipath-relax option allows load-
sharing across providers with different (but equal-length) autonomous system
paths. Without this option, ECMP expects the AS paths to be identical for load-
sharing.
bgp bestpath med confed
Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
Syntax
bgp bestpath med confed
To disable MED comparison on BGP confederation paths, enter the no bgp
bestpath med confed command.
Defaults Disabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
414
Border Gateway Protocol