CLI Guide

Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of
the VRF to clear information on route dampening
corresponding to that VRF
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active
state.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to clear the ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to clear the ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to clear the ipv6 unicast routes.
ipv4-address
mask
(OPTIONAL) Enter an IPv4 address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
ipv6–address
mask
(OPTIONAL) Enter the IPv6 address and the network mask
to clear information on IPv6 route dampening.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information After you enter this command, the software deletes the history routes and returns
the suppressed routes to the Active state.
436
Border Gateway Protocol