CLI Guide

permit bandwidth
Enables you to specify link band width extended-community attribute as the matching criteria to permit
incoming or outgoing traffic.
Syntax
permit bandwidth
To disable this setting, enter the no permit bandwidth command.
Parameters
bandwidth Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for permitting
traffic. The range is from 0 to 102400.
Defaults N/A
Command Modes EXTENDED COMMUNITY LIST
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Related
Commands
• deny bandwidth – link band width extended-community attribute as the
matching criteria to deny incoming or outgoing traffic.
redistribute
Redistribute routes into BGP.
Syntax
redistribute {connected | static} [route-map map-name]
To disable redistribution, use the no redistribution {connected | static}
command.
Parameters
connected Enter the keyword connected to redistribute routes from
physically connected interfaces.
static
Enter the keyword static to redistribute manually
configured routes.
These routes are treated as incomplete routes.
486
Border Gateway Protocol