CLI Guide

Proceed with Offline-Diags [confirm yes/no]:y
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane
statistics | i2c statistics | management statistics | party-bus
statistics | sata-interface statistics} | unit number counters
| stack-port stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the
selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to
clear the data plane statistics.
cpu i2c statistics Enter the keywords cpu i2c statistics to clear the i2c
devices statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear
the management statistics.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics
to clear the sata interface statistics.
stack-port Enter the keywords stack-port then the port number of
the stacking port to clear the statistics of the particular
stacking port. The range is from 1 to 52.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
572
Debugging and Diagnostics