CLI Guide

clear ip dhcp snooping
Clear the DHCP binding table.
Syntax
clear ip dhcp snooping {binding | source-address-validation
discard-counters [interface interface]}
Parameters
binding
Clears the binding table.
source-address-
validation discard-
counters
Clears discard counters from all the interfaces configured
with IP Source Guard.
interface interface
(OPTIONAL) Specifies an interface to clear the discard
counters.
Enter any of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0)
Added the keywords discard-counters, interface, and
the variable interface on the S4810, S4820T, S5000, S6000,
Z9000, Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Dynamic Host Configuration Protocol (DHCP)
615