CLI Guide

vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is
leasing.
interface type Enter the keyword interface then the type of interface to
which the host is connected:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
• show ip dhcp snooping — display the contents of the DHCP binding table.
620
Dynamic Host Configuration Protocol (DHCP)