CLI Guide

ip domain-name
Configures the default domain corresponding to a specific VRF. This domain is appended to the in
complete DNS requests corresponding to the specified VRF.
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name configuration corresponding to a specific VRF, use the
no ip domain-name [vrf vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the
VRF to configure the domain corresponding to that VRF.
name Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to configure a domain name corresponding to a VRF. This
domain is appended to the in complete DNS requests corresponding to the
specified VRF.
Example
Dell(conf)# ip domain-name vrf jay dell.com
ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS
requests corresponding to a specific VRF.
Syntax
ip domain-list [vrf vrf-name] name
Dynamic Host Configuration Protocol (DHCP)
635