CLI Guide

show boot system

Displays information about boot images currently configured on the system.

Syntax

show boot system stack-unit{stack-unit—id | all}

Parameters

all Enter the keyword all to display the boot image information

for all stack units.

stack-unit-id Enter the stack-unit-id to display boot image

information for a stack-unit.

Defaults none

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the C-Series and E-Series.

Example

Dell# show boot system stack-unit 1

Current system image information in the system:

=============================================

Type Boot Type A B

----------------------------------------------------------------

Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)

[boot]

Dell#

File Management