CLI Guide

Example

Dell# show running-config

Current Configuration ...

! Version 9-0(2-0)

! Last configuration change at Thu Apr 18 10:18:39 2013 by

admin

! Startup-config last updated at Thu Apr 18 10:18:40 2013 by

admin

boot system stack-unit 1 primary system: A:

boot system stack-unit 1 secondary tftp://10.16.127.35/Dell-

SI-9-0-2-0.bin

boot system stack-unit 1 default system: A:

boot system gateway 10.16.132.254

redundancy auto-synchronize full

redundancy disable-auto-reboot stack-unit

redundancy disable-auto-reboot stack-unit 1

redundancy disable-auto-reboot stack-unit 2

redundancy disable-auto-reboot stack-unit 3

redundancy disable-auto-reboot stack-unit 4

redundancy disable-auto-reboot stack-unit 5

redundancy disable-auto-reboot stack-unit 6

hardware watchdog stack-unit 1

hardware watchdog stack-unit 2

hardware watchdog stack-unit 3

Example

Dell# show running-config status

running-config bytes 10257, checksum 0xFD33339F

startup-config bytes 10257, checksum 0xFD33339F

Usage Information The status option allows you to display the size and checksum of the running

configuration and the startup configuration.

show startup-config

Display the startup configuration.

Syntax

show startup-config

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

File Management