CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

901

902

903

904

905

906

907

908

909

910

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.4.2.1 Introduced on the S-Series.

8.4.2.0 Introduced on the E-Series.

7.8.1.0 Introduced on the C-Series.

Example

show cam-acl (non default)

Dell(conf)# cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2

l2qos 1 l2pt 0 ipmacacl 0 vman-qos 0 ecfmacl 0

Dell#show cam-acl

-- Chassis Cam ACL --

Current Settings(in block sizes)

1 block = 128 entries

L2Acl : 2

Ipv4Acl : 4

Ipv6Acl : 4

Ipv4Qos : 2

L2Qos : 1

L2PT : 0

IpMacAcl : 0

VmanQos : 0

VmanDualQos : 0

EcfmAcl : 0

FcoeAcl : 0

iscsiOptAcl : 0

ipv4pbr : 0

vrfv4Acl : 0

Openflow : 0

fedgovacl : F3940

-- stack-unit 1 --