CLI Guide

Version Description

8.3.11.1 Introduced on the Z9000.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original Command

Usage Information After entering the banner login command, type one or more spaces and a

delineator character. Enter the banner text then the second delineator character.

When the user is connected to the router, if a message of the day banner is

configured, it displays first. If no message of the day banner is configured, the login

banner and prompt appear. After the user has logged in, the banner EXEC (if

configured) displays.

Example

Dell(conf)# banner exec ?

LINE c banner-text c, where 'c' is a delimiting character

Dell(conf)# banner exec %

Enter TEXT message. End with the character '%'.

This is the banner%

Dell(conf)# end

Dell# exit

2d18h1m: %STKUNIT1-M:CP %SEC-5-LOGOUT: Exec session is

terminated on console

This is the banner

Dell con0 now available

Press RETURN to get started.

2d18h2m: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful

on console

This is the banner

Dell>

Commands

• line — enables and configures the console and virtual terminal lines to the

system.

banner login

Set a message of the day banner to appear after logging on to the system.

Syntax

banner login {keyboard-interactive | c line c}

Enter no banner login to delete the banner text. Enter no banner login

keyboard-interactive to automatically go to the banner message prompt

(does not require a carriage return).

Control and Monitoring