CLI Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
Usage Information
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will
be erased.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword * to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
956
Intermediate System to Intermediate System (IS-IS)