Manualshelf

CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series
951952953954955956957958959960
Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require
NSAPs and system IDs.
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP
mapping.
nsap Enter a specific NSAP address that is associated with the
name parameter.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To configure a shortcut name that you can use instead of entering a long string of
numbers associated with an NSAP address, use this command.
Intermediate System to Intermediate System (IS-IS)
957