CLI Guide

Related
Commands
• hostname dynamic — enable dynamic learning of host names from routers in
the domain and allows the routers to advertise the host names in LSPs.
debug isis
Enable debugging for all IS-IS operations.
Syntax
debug isis
To disable debugging of IS-IS, use the no debug isis command.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Entering debug isis enables all debugging parameters.
To display all debugging information in one output, use this command. To turn off
debugging, you normally enter separate no forms of each command. To disable all
debug messages for IS-IS at once, enter the
no debug isis command.
958
Intermediate System to Intermediate System (IS-IS)