CLI Guide

debug isis adj-packets
Enable debugging on adjacency-related activity such as hello packets that are sent and received on IS-IS
adjacencies.
Syntax
debug isis [vrf vrf-name] adj-packets [interface]
To turn off debugging, use the no debug isis [vrf vrf-name]adj-packets
[interface] command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to enable the debug information on IS-IS for an
adjacency tied to that VRF. This command displays the IIH
related debug details.
interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Intermediate System to Intermediate System (IS-IS)
959