CLI Guide

Version Description
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage Information The administrative distance indicates the trust value of incoming packets. A low
administrative distance indicates a high trust rate. A high value indicates a lower
trust rate. For example, a weight of 255 is interpreted that the routing information
source is not trustworthy and should be ignored.
distribute-list in
Filter network prefixes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-
name in [interface] command.
Parameters
prefix-list-name Specify the prefix list to filter prefixes in routing updates.
interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
Intermediate System to Intermediate System (IS-IS)
967