Command Line Reference Guide

show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
S5000
Syntax
show qos dot1p-queue-mapping
Defaults
• dot1p Priority: 0 1 2 3 4 5 6 7
• Queue: 0 0 0 1 2 3 3 3
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
service-class dot1p-mapping – Identifies the class map.
show qos policy-map
View the QoS policy map information.
S5000
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary
interface
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and slot/port
or number information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
detail interface To view a policy map interface in detail, enter the keyword detail
and optionally one of the following keywords and slot/port or number
information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
1056