Command Line Reference Guide

Related
Commands
max-age – changes the wait time before STP refreshes protocol configuration information.
hello-time – changes the time interval between BPDUs.
hello-time
Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).
S5000
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds Enter a number as the time interval between transmission of BPDUs.
The range is 1 to 10. The default is 2 seconds.
Defaults 2 seconds
Command Modes SPANNING TREE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
forward-delay – changes the wait time before STP transitions to the Forwarding state.
max-age – changes the wait time before STP refreshes protocol configuration information.
max-age
Set the time interval for the spanning tree bridge to maintain configuration information before refreshing that
information.
S5000
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
seconds Enter a number of seconds the FTOS waits before refreshing
configuration information. The range is 6 to 40. The default is 20
seconds.
Defaults 20 seconds
Command Modes SPANNING TREE
1224