Command Line Reference Guide

end-day Enter the number of the day. The range is 1 to 31. You can enter the
name of a month to change the order of the display to time day month
year.
end-month Enter the name of one of the 12 months in English. You can enter the
name of a day to change the order of the display to time day month
year.
end-time Enter the time in hours:minutes. For the hour variable, use the 24-hour
format; example, 17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is 1993 to 2035.
offset (OPTIONAL) Enter the number of minutes to add during the summer-
time period. The range is 1 to1440. The default is 60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
calendar set – sets the hardware clock.
clock summer-time recurring – sets a date (and time zone) on which to convert the switch to
daylight saving time each year.
show clock – displays the current clock settings.
clock summer-time recurring
Set the software clock to convert to daylight saving time on a specific day each year.
S5000
Syntax
clock summer-time time-zone recurring [start-week start-day
start-month start-time end-week end-day end-month end-time
[offset]]
To delete a daylight saving time zone configuration, use the no clock summer-time
command.
Parameters
time-zone Enter the three-letter name for the time zone. This name is displayed
in the show clock output. You can enter up to eight characters.
start-week (OPTIONAL) Enter one of the following as the week that daylight
saving begins and then enter values for start-day through end-time:
• week-number: Enter a number from 1 to 4 as the number of
the week in the month to start daylight saving time.
• first: Enter this keyword to start daylight saving time in the
first week of the month.
1256