Command Line Reference Guide

Build Path: /sites/sjc/work/build/buildSpaces/build12/
E9-0-1/SW/SRC
FTOS uptime is 5 day(s), 17 hour(s), 19 minute(s)
System image file is "lnaidu-dcb"
System Type: S5000
Control Processor: Freescale QorIQ P2020 with 2147483648 bytes
of memory.
16M bytes of boot flash memory.
1 4-module, 4-port GE/TE/FG (SH)
12 Ten GigabitEthernet/IEEE 802.3 interface(s)
4 Forty GigabitEthernet/IEEE 802.3 interface(s)
----------- show clock ----------------------
10:46:02.545 UTC Tue Apr 30 2013
----------- show running-config --------------
FTOS#show running-config
Current Configuration ...
! Version 9.0(1.3)
! Last configuration change at Tue Apr 30 10:12:51 2013 by
admin
!
boot system stack-unit 1 primary tftp://10.11.8.12/lnaidu-dcb
boot system stack-unit 1 secondary tftp://10.11.8.13/FTOS-
SH-1-0-0-270.bin
boot system stack-unit 1 default tftp://10.11.8.13/FTOS-
SH-1-0-0-270.bin
boot system gateway 10.11.227.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
redundancy disable-auto-reboot stack-unit 6
redundancy disable-auto-reboot stack-unit 7
redundancy disable-auto-reboot stack-unit 8
redundancy disable-auto-reboot stack-unit 9
redundancy disable-auto-reboot stack-unit 10
redundancy disable-auto-reboot stack-unit 11!
!--------output truncated ---------!
Related
Commands
show version – displays the FTOS version.
show system – displays the current switch status.
show environment – displays the system component status.
show processes memory – displays memory usage based on running processes.
131