Command Line Reference Guide

Parameters
backbone Enter the keyword backbone to redistribute matched routes to the
OSPF backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes to IS-IS
Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched routes to IS-
IS Level 1 and Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes to IS-IS
Level 2.
stub-area Enter the keyword stub to redistributed matched routes to OSPF
stub areas.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
set automatic-tag – computes the tag value of the route.
set metric – specifies the metric value assigned to redistributed routes.
set metric-type – specifies the metric type assigned to redistributed routes.
set tag – specifies the tag assigned to redistributed routes.
set local-preference
Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local autonomous system.
S5000
Syntax
set local-preference value
Parameters
value Enter a number as the LOCAL_PREF attribute value. The range is 0 to
4294967295.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The set local-preference command changes the LOCAL_PREF attribute for routes
meeting the route map criteria. To change the LOCAL_PREF for all routes, use the
bgp
default local-preference command.
238