Command Line Reference Guide

peer-group-name (OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
default-metric
Allows you to change the metric of redistributed routes to locally originated routes. Use this command with the
redistribute command.
S5000
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number Enter a number as the metric to be assigned to routes from other
protocols. The range is 1 to 4294967295.
Defaults 0
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED)
attribute for redistributed routes only.
Related
Commands
bgp always-compare-med – enables comparison of all BGP MED attributes.
redistribute – redistributes routes from other routing protocols into BGP.
description
Enter a description of the BGP routing protocol
S5000
Syntax
description {description}
To remove the description, use the no description {description} command.
279