Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command applies the service-policy based on the type of protocol defined in the ACL
rules.
You must create ACL and QoS policies prior to enabling this command.
Example
FTOS#show cpu-queue rate cp
Service-Queue Rate (PPS)
-------------- -----------
Q0 1300
Q1 300
Q2 300
Q3 300
Q4 2000
Q5 400
Q6 400
Q7 1100
FTOS#
show ip protocol-queue-mapping
Display the queue mapping for each configured protocol.
S5000
Syntax
show ip protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort
Rate(kbps)
---- -------- -------- ------- ----- ------
-----------
TCP (BGP) any/179 179/any _ Q6 CP
100
UDP (DHCP) 67/68 68/67 _ Q6/Q5 CP _
UDP (DHCP-R) 67 67 _ Q6 CP _
TCP (FTP) any 21 _ Q6 CP _
ICMP any any _ Q6 CP _
IGMP any any _ Q7 CP _
TCP (MSDP) any/639 639/any _ Q6 CP _
UDP (NTP) any 123 _ Q6 CP _
OSPF any any _ Q7 CP _
PIM any any _ Q7 CP _
UDP (RIP) any 520 _ Q7 CP _
TCP (SSH) any 22 _ Q6 CP _
TCP (TELNET) any 23 _ Q6 CP _
385