Command Line Reference Guide

simply rely on GVRP for VLAN updates. But if the local bridge needs to know only how to reach a given VLAN,
then GVRP provides all necessary information.
• The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The
GVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is
disabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged all
VLANs that were manually configured.
clear gvrp statistics
Clear GVRP statistics on an interface.
S5000
Syntax
clear gvrp statistics interface type slot/port
Parameters
interface type
slot/port
Enter the interface type followed by slot/port or number information.
Valid slot numbers are 0-11. The valid port numbers for each interface
type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
Defaults none
Command Modes EXEC
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show gvrp statistics – displays the GVRP statistics.
debug gvrp
Enable debugging on GVRP.
S5000
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the no debug gvrp {config | events | pdu}
command.
458