Command Line Reference Guide

Defaults 1000 milliseconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ip igmp querier-timeout
Change the interval that must pass before a multicast router decides that there is no longer another multicast router that
should be the querier.
S5000
Syntax
ip igmp querier-timeout seconds
To return to the default value, use the no ip igmp querier-timeout command.
Parameters
seconds Enter the number of seconds the router must wait to become the new
querier. The range is 60 to 300. The default is 125 seconds.
Defaults 125 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ip igmp query-interval
Change the transmission frequency of IGMP general queries sent by the Querier.
S5000
Syntax
ip igmp query-interval seconds
To return to the default values, use the no ip igmp query-interval command.
Parameters
seconds Enter the number of seconds between queries sent out. The range is
1 to 18000. The default is 60 seconds.
Defaults 60 seconds
Command Modes INTERFACE
477