Command Line Reference Guide

• For the management interface on the stack-unit, enter the
keyword ManagementEthernet followed by slot number
(0-1) and port number zero (0).
• For a Fibre Channel interface, enter the keyword
fibrechannel followed by slot/port numbers. The port
range is 0 to 47.
vrrp [[ipv6] vrid ] (OPTIONAL) Enter the keyword vrrp to clear the counters of all
VRRP groups. To clear the counters of VRRP groups on all IPv6
interfaces, enter ipv6. To clear the counters of a specified group,
enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC learning
limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
show interfaces – displays information on the interfaces.
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
S5000
Syntax
clear dampening [interface-type slot/port]
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
490