Command Line Reference Guide
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the show interfaces fibrechannel command to display the current
configuration and operation of a Fibre Channel port on the S5000.
NOTE: In release 9.0.(1.3), an FC module can be installed only in expansion slot 0 (ports 0 to
11) on an S5000 switch.
The following table describes the show interfaces fibrechannel command output
shown in the following example.
Table 6. Output Fields for the
show interfaces fibrechannel
Command
Field Description
Information:
Fibrechannel 0/0 is down, FC link is down Administrative state of
the Fibre Channel
interface (up/enabled or
down/shutdown) and
operational state of the
FC link (up or down)
.
Pluggable media present, SFP+ type Pluggable optic is
inserted in the port or
not, and the SFP+ optic
type
.
Wavelength Wavelength of the
inserted optic
.
SFP+ receive power Power received on SFP
+ optic
.
Interface index Index number of FC port.
MTU Maximum transmission
unit on interface (not
user-configurable; fixed
at 2148 bytes)
.
LinkSpeed Configured
transmission speed of
the FC port when the
port link is down or
current speed when the
port link is up
. Valid link speeds are:
auto (port autosenses
speed of peer FC port),
2G, 4G, or 8G.
552