Command Line Reference Guide

match ipv6 next-hop
Configure a filter which matches based on the next-hop IPv6 addresses specified in the IPv6 prefix list.
S5000
Syntax
match ipv6 next-hop prefix-list prefix-list-name
To delete a match, use the no match ipv6 next-hop prefix-list prefix-
list-name command.
Parameters
prefix-list prefix-
list-name
Enter the keywords prefix-list followed by the name of
configured prefix list, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match ipv6 address – redistributes routes that match an IP address.
match ipv6 route-source – redistributes routes that match routes advertised by other routers.
match ipv6 route-source
Configure a filter which matches based on the routes advertised in the IPv6 prefix lists.
S5000
Syntax
match ipv6 route-source prefix-list prefix-list-name
To delete a match, use the no match ipv6 route-source prefix-list
prefix-list-name command.
Parameters
prefix-list prefix-
list-name
Enter the keywords prefix-list followed by the name of
configured prefix list, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match ipv6 address – redistributes routes that match an IP address.
match ipv6 next-hop – redistributes routes that match the next-hop IP address.
630