Command Line Reference Guide

show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
S5000
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ipv6 flowlabel-zero – Configure IPv6 address auto-configuration for the management interface.
show ipv6 fib stack-unit
View all FIB entries.
S5000
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The
range is 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary of
entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Host tables are not stored in CAM tables on the S5000. Entries for camIndex displays as zero
(0) on the
show ipv6 fib stack-unit output for neighbor entries, such as address
resolution protocol (ARP) entries.
644