Command Line Reference Guide
Field Description
(undefined) Identifies the type of route:
• L = Local
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
• + = summary routes
Destination Identifies the route’s destination IPv6 address.
Gateway Identifies whether the route is directly connected and on which
interface the route is configured.
Dist/Metric Identifies if the route has a specified distance or metric.
Last Change Identifies when the route was last changed or configured.
Example
FTOS#show ipv6 route
Codes:C-connected, L-local, S-static, R-RIP,
B-BGP, IN-internal BGP, EX-external BGP,LO-Locally Originated,
O-OSPF, IA-OSPF inter area, N1-OSPF NSSA external type 1,
N2-OSPF NSSA external type 2, E1-OSPF external type 1,
E2-OSPF external type 2, i-IS-IS, L1-IS-IS level-1,
L2-IS-IS level-2, IA- IS-IS inter area, *-candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
----------------------------------------------
C 2001::/64 [0/0]
Direct, Te 1/1, 00:28:49
C 2002::/120 [0/0]
Direct, Te 1/1, 00:28:49
C 2003::/120 [0/0]
Direct, Te 1/1, 00:28:49
649