Command Line Reference Guide

rmon
for the current RMON configuration
route-map
for the current route map configuration
sflow
for the current sFlow configuration
snmp
for the current SNMP configuration
spanning-
tree
for the current spanning tree configuration
static
for the current static route configuration
status
for the file status information
tacacs+
for the current TACACS+ configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group configuration
trace-list
for the current trace-list configuration
uplink-
state-group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display switch
interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for
the running configuration and the start-up configuration.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show running-config
Current Configuration ...
! Version 9-0(1-2)
! Last configuration change at Mon Jun 10 21:20:04 2030 by
admin
!
boot system stack-unit 0 primary system: B:
boot system stack-unit 0 secondary tftp://10.200.200.241/kp-
diablo
boot system stack-unit 0 default tftp://10.11.200.241/kp-diablo
!
redundancy auto-synchronize full
!
service timestamps log datetime
!
hostname FTOS
!
enable password 7 b125455cf679b208e79b910e85789edf
!
username admin password 7 1d28e9f33f99cf5c
72