Command Line Reference Guide

port-channel-protocol lacp
Enable LACP on any LAN port.
S5000
Syntax
port-channel-protocol lacp
To disable LACP on a LAN port, use the no port-channel-protocol lacp command.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show lacp – displays the LACP information.
show interfaces port-channel – displays information on configured Port Channel groups.
show lacp
Display the LACP matrix.
S5000
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
Enter a port-channel number: The range is 1 to 128.
sys-id (OPTIONAL) Enter the keywords sys-id and the value that identifies
a system.
counters (OPTIONAL) Enter the keyword counters to display the LACP
counters.
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example (Port-
Channel-Number)
FTOS#show lacp 1
Port-channel 1 admin up, oper up, mode lacp
Actor System ID: Priority 32768, Address 0001.e800.a12b
Partner System ID: Priority 32768, Address 0001.e801.45a5
Actor Admin Key 1, Oper Key 1, Partner Oper
Key 1
LACP LAG 1 is an aggregatable link
807