Command Line Reference Guide

Related
Commands
disable – disables multiple spanning tree.
revision
The revision number for the multiple spanning tree configuration.
S5000
Syntax
revision range
To return to the default values, use the no revision command.
Parameters
range Enter the revision number for the MST configuration. The range is 0 to
65535. The default is 0.
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
For two MSTP switches to be within the same MST region, the switches must share the same
revision number.
Related
Commands
msti – maps the VLAN(s) to an MST instance.
name – assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
S5000
Syntax
show config
Command Modes MULTIPLE SPANNING TREE
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
869