Deployment Guide

32 Leaf-Spine Deployment and Best Practices Guide | Version 1.0
7.3.1 show ip bgp summary
When BGP is configured, this command shows the status of all BGP connections. Each spine has four
neighbors (the four leafs) and each leaf has two neighbors (the two spines). This command also confirms
BFD is enabled on the 6
th
line of output.
Z9100-Spine-1#show ip bgp summary
BGP router identifier 10.0.1.1, local AS number 64601
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
8 network entrie(s) using 608 bytes of memory
13 paths using 1404 bytes of memory
BGP-RIB over all using 1417 bytes of memory
BFD is enabled, Interval 100 Min_rx 100 Multiplier 3 Role Active
29 BGP path attribute entrie(s) using 4816 bytes of memory
27 BGP AS-PATH entrie(s) using 270 bytes of memory
4 neighbor(s) using 32768 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
192.168.1.1 64701 3014 3014 0 0 0 1d:19:31:07 3
192.168.1.3 64702 3013 3011 0 0 0 1d:19:31:11 3
192.168.1.5 64703 3014 3012 0 0 0 1d:19:30:59 3
192.168.1.7 64704 3014 3012 0 0 0 1d:19:31:06 3
S4048-Leaf-1#show ip bgp summary
BGP router identifier 10.0.2.1, local AS number 64701
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
8 network entrie(s) using 608 bytes of memory
12 paths using 1296 bytes of memory
BGP-RIB over all using 1308 bytes of memory
BFD is enabled, Interval 100 Min_rx 100 Multiplier 3 Role Active
17 BGP path attribute entrie(s) using 2752 bytes of memory
15 BGP AS-PATH entrie(s) using 150 bytes of memory
2 neighbor(s) using 16384 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/Pfx
192.168.1.0 64601 15 17 0 0 0 00:03:41 5
192.168.2.0 64602 13 13 0 0 0 00:03:41 5
7.3.2 show ip ospf neighbor
When OSPF is configured, this command shows the state of all connected OSPF neighbors. In this
configuration, each spine has four neighbors (the four leafs) and each leaf has two neighbors (the two
spines).
Z9100-Spine-1#sh ip ospf neighbor