Deployment Guide

7 Dell EMC Networking – Deploying Data Center Bridging
2 Test setup
Figure 1 shows the setup used to test DCB, PFC, and ETS. The following list defines the setup:
• Traffic is bi-directional.
• Traffic is between two operating systems – OS9 {9.13(0.0) & OS10 (10.4.0E(X2)}.
• Priority Flow Control is “ON” with iSCSI traffic and “OFF” with LAN traffic.
• ETS is set to 1% for LAN traffic, 99% for iSCSI traffic.
• DCB is on at both ends.
• Ixia traffic generator transmitting two types of traffic:
o LAN CoS 0 @ 10GE
o iSCSI CoS 4 @ 40GE
Figure 1 Dell EMC Networking DCB Test Setup