Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
There are several ways to retrieve VEP product service tag.
How to retrieve a VEP4600 product service tag
Retrieve service tag from BMC, DIAG OS, and luggage tag
Finding service tag through BMC
● Log in and run the following command from the BMC console.
ipmitool -I lanplus -H 127.0.0.1 -U admin -P admin fru print | grep "Product
Serial"
MC1 not present, ignore FRU
MC1 not present, ignore FRU
Product Serial : GWNRG02
Finding service tag through DIAG OS
● Boot into DIAG OS and run the following command.
dmidecode -t 1 | grep Serial
Serial Number: GWNRG02
Finding service tag through luggage tag
● Pull out the luggage tag from the unit upper right corner.
12
BIOS