Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
Password reset
Steps to set password to <servicetag>! .
Unified firmware updater admin password reset
An admin user can reset the password in the United firmware updater v3.2.
NOTE: This functionality is only for an admin user.
NOTE: No password is required for a user account.
The following steps permit an user to reset an admin password to the default <servicetag>! password.
1. Select either Delete or F2 to go to the setup menu .
2. Press enter to get into the user account.
3. Select Save & Exit, then Restore Defaults, and finally Save Changes.
4. Select Reset to return the admin password back to <servicetag>!
16
BIOS