Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
Table 2. BIOS 3.41.0.9-12 settings changes
BIOS 3.41.0.9-12 settings changes
Updated the ECC test function. PR# BL-90
Added DMI information (Production Version/Serial Number/SKU Number/Family) to DMI Type 1 from FRU.
Fixed the UART 1 that does not print out when BMC stays in uboot.
Set MC slot Bifurcation based on GPIO. PR# BL-207
Support for new boot order in sequence: Legacy USB, UEFI USB, embedded
network (PXE), UEFI hard disk, other UEFI device, legacy hard disk, UEFI shell.
PR# BL-180
Set critical boot device timeout to 60 seconds for final failure to force boot to backup BIOS and disabled critical device test by
default.
Added function to read if SR-IOV is enabled and choose the correct PCI device list
for POST PCI test. Post PCI test (critical test) will not fail if SR-IOV is enabled or
disabled.
PR# BL-227
PchHdAudio default set to disable.
Changed default timeout to break into the setup menu to 10 seconds. PR# BL-188
Baseline for DIAG in BIOS feature is disabled.
Set Dell proprietary GUID to DMI type 11.
Deemphasis setting of MC1 and MC2. PR# BL-207
8 New in this release