Reference Guide

DIMM Extended Memory Test Flags parameters
The Upper and Lower Memory tests are scheduled to run in the following boot and only in that next boot. SPD Loop test can be
enabled/disabled with counts 2 to 6.
SPD TEST loop count verifies the spd checksum for count times at boot time.
The Extended Memory Test flags configure what tests run in the BOTH Extended Memory tests at boot.
Extended flags are consistent with the CMOS control bits
NOTE: .A progress bar displays what test is running and how many tests are completed.
IPMI (BMC) diagnostics
IPMI component embedded DIAG configuration.
Entering IPMI diagnostics
The IPMI diagnostic tab is available from the Dell diagnostics menu.
To enter the IPMI Diagnostics, select IPMI Diagnostics from the Dell diagnostics menu.
24
Dell EMC embedded DIAG OS