Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
LAN destinations screen
LAN destinations configuration
LAN Channel
Displays LAN Channel Number of the selected slot (read-only).
Destination Type
● SNMP Trap
● E-Mail
SNMP Destination Address
If Destination type is SNMP Trap, then give the IP address of the system that will receive the alert. Destination address will
support the following:
● IPv4 address format.
● IPv6 address format.
BMC Username
If Destination type is Email Alert, then choose the user to whom the email alert has to be sent.NOTE: Email address for the user
has to be configured under Settings->Users Management.
Email Subject
These fields must be configured if email alert is chosen as destination type. An email will be sent to the configured email address
of the user in case of any severity events with a subject specified in subject field and will contain the message field's content as
the email body.
Email Message
These fields must be configured if email alert is chosen as destination type. An email will be sent to the configured email address
of the user in case of any severity events with a subject specified in subject field and will contain the message field's content as
the email body.
NOTE: These fields are not applicable for AMI-Format email users.
BMC web GUI 23