Users Guide

User management screen
User management configuration
Username
Enter the name of the new user:
● IP Address consists of four sets of numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
● Each set ranges from 0 to 255.
● First Number must not be 0.
Change Password
Select this option to change the password.
Password Size
Select the Size of the password.
Password
Enter a strong password which consist of atleast one upper case letter, alphanumeric and special characters.
NOTE:
Password is mandatory to be entered while enabling SNMP Access and should have minimum 8 characters when
SNMP status is enabled.
Enable User Access
Check the box to enable user access for the user. Upon enabling the user Access, the IPMI messaging privilege will be assigned
to user.
NOTE:
It is recommended that the IPMI messaging option should be enabled for the user to choose the User Access option,
while creating User through IPMI.
Privilege
Select the privilege level assigned to this user when the user accesses BMC through network interface.
There are four levels of Network Privileges:
● User
● Administrator
● Operator
● None
SNMP Access
Check the box to enable SNMP access for the user.
BMC web GUI
39