Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
Power_Status | 0x0 | discrete | 0x0180| na | na | na | na |
na | na
Watchdog2 | 0x0 | discrete | 0x0080| na | na | na | na |
na | na
SEL | 0x0 | discrete | 0x0080| na | na | na | na |
na | na
BMC boot | 0x0 | discrete | 0x0180| na | na | na | na |
na | na
Outlet_Temp | 31.000 | degrees C | ok | na | na | na | na |
na | na
Inlet1_Temp | 25.000 | degrees C | ok | na | na | na | na |
na | na
Inlet2_Temp | 23.000 | degrees C | ok | na | na | na | na |
na | na
Inlet3_Temp | 22.000 | degrees C | ok | na | na | na | 59.000 |
62.000 | na
Inlet4_Temp | 29.000 | degrees C | ok | na | na | na | na |
na | na
Fan1 | 11400.000 | RPM | ok | na | 1080.000 | na | na |
na | na
Fan2 | 11400.000 | RPM | ok | na | 1080.000 | na | na |
na | na
Fan3 | 11640.000 | RPM | ok | na | 1080.000 | na | na |
na | na
The command parameters change slightly when using ipmitool over LAN:
$ ./ipmitool -U admin -P admin -I lanplus -H 10.11.227.53 sensor
XP12R0V | 12.160 | Volts | ok | 8.512 | 9.792 | 10.944 | 13.440 |
14.656 | 15.872
VNN_AUX_PCH | 0.910 | Volts | ok | 0.539 | 0.630 | 0.721 | 1.197 |
1.169 | 1.260
XP2R5V_VPPB | 2.548 | Volts | ok | 1.750 | 2.002 | 2.254 | 2.758 |
2.996 | 3.248
XP1R2V_VDDRB | 1.190 | Volts | ok | 0.840 | 0.959 | 1.078 | 1.316 |
1.442 | 1.561
XP0R6V_VTTB | 0.595 | Volts | ok | 0.420 | 0.476 | 0.539 | 0.658 |
0.721 | 0.784
XP5R0V | 5.177 | Volts | ok | 3.627 | 4.123 | 4.650 | 5.673 |
6.200 | 6.727
XP3R3V_AUX_CP | 3.325 | Volts | ok | 2.310 | 2.643 | 2.975 | 3.623 |
3.955 | 4.288
XP3R3V_AUX_PCH | 3.308 | Volts | ok | 2.310 | 2.643 | 2.975 | 3.623 |
3.955 | 4.288
XP1R8V_AUX_PCH | 1.775 | Volts | ok | 1.265 | 1.438 | 1.622 | 1.979 |
2.162 | 2.336
XP1R05V_PCH | 1.050 | Volts | ok | 0.735 | 0.840 | 0.945 | 1.155 |
1.260 | 1.365
XP2R5V_VPPA | 2.548 | Volts | ok | 1.750 | 2.002 | 2.254 | 2.758 |
2.996 | 3.248
XP1R2V_VDDRA | 1.204 | Volts | ok | 0.840 | 0.959 | 1.078 | 1.316 |
1.442 | 1.561
XP0R6V_VTTA | 0.602 | Volts | ok | 0.420 | 0.476 | 0.539 | 0.658 |
0.721 | 0.784
VCCIO_CP | 1.001 | Volts | ok | 0.504 | 0.602 | 0.700 | 1.197 |
1.302 | 1.400
VCCIN_CP | 1.775 | Volts | ok | 0.898 | 1.081 | 1.265 | 2.162 |
2.336 | 2.519
VCCSA_CP | 0.847 | Volts | ok | 0.259 | 0.343 | 0.427 | 1.190 |
1.274 | 1.358
Power_Status | 0x0 | discrete | 0x0180| na | na | na | na |
na | na
Watchdog2 | 0x0 | discrete | 0x0080| na | na | na | na |
na | na
SEL | 0x0 | discrete | 0x0080| na | na | na | na |
na | na
BMC boot | 0x0 | discrete | 0x0180| na | na | na | na |
na | na
Outlet_Temp | 30.000 | degrees C | ok | na | na | na | na |
na | na
Inlet1_Temp | 26.000 | degrees C | ok | na | na | na | na |
na | na
Inlet2_Temp | 22.000 | degrees C | ok | na | na | na | na |
48
Configuration methods