Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
Current released firmware
These software versions apply to the VEP4600
Table 5. Current firmware
Device Firmware Current version
VEP4600 BMC 2.20
BIOS 3.41.0.9-18
VEP4600 CPLD v10 (0x10)
VEP4600 Unified firmware updater v3.2
rNDC CPLD 0x02
rNDC nvm DUP package – 19.05.12
x722 nvm 3.33
NOTE: If BMC version is less than 1.23, CPLD versions will not be shown correctly.
Topics:
• Minimum firmware upgrades
• USB based firmware update
• Remote firmware update
Minimum firmware upgrades
Manual or automatic BMC, BIOS, and CPLD firmware upgrades is required before VEP4600 Expansion Card installation.
NOTE: Minimum firmware requirements
Table 6. Required firmware minimum release requirements.
Device Firmware Minimum firmware release required when
installing an rNDC Card
VEP4600 BMC v1.22
BIOS v3.41.0.9-10
VEP4600 CPLD V0C
Expansion Card - rNDC x710 CPLD v02
USB based firmware update
Update your BMC, BIOS, and CPLD firmware with the following commands.
NOTE: DIAG OS version 6 is the minimum configuration to install VEP4600 Expansion Cards.
6
70 Current released firmware