Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
Type root/calvin to login
Update BMC in DIAG OS
About this task
Steps
Use this command to update BMC:
NOTE: This <BMC_update_filename> is the file from the USB drive that is mounted.
#updatetool -D BMC -U -e <BMC_update_filename>
You are prompted for confirmation. Press y and enter to continue. When the update is complete, you must powercycle the
system.
root@dellemc-diag-os:~# cd /mnt/usb/
root@dellemc-diag-os:/mnt/usb# updatetool -D BMC -U -e
<
BMC_update_filename
>
disable preserve BIOS configration
00
Disable device protect
Disable BMC protect operation success, wait HW reset
Write image to BMC
INFO: Yafu INI Configuration File not found... Default options will not be applied...
Creating IPMI session via USB...Done
---------------------------------------------
YAFUFlash - Firmware Upgrade Utility (Version 4.112.0)
---------------------------------------------
(C)Copyright 2016, American Megatrends Inc.
Image To be updated is (Image-1)
===================================================
Firmware Details
===================================================
Current released firmware
75