Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
Remote power cycle system
Reboot the VEP4600 using ipmitool from BMC, DIAG OS, or a remote IPMI server network.
Topics:
• From BMC console DIAG OS power cycle
• Remote ipmitool DIAG OS power management
From BMC console DIAG OS power cycle
About this task
Steps
Run ipmitool from the BMC serial console command prompt.
a. Use this command to power cycle a local system.
# ipmitool -H 127.0.0.1 -U admin -P admin power cycle
If BMC has a different administrator configured, replace the -u and -p parameters with admin\admin
NOTE: Username and password must be admin\admin
● -u—admin
● -p—admin
~ # ipmitool -H 127.0.0.1 -U admin -P admin power status
Chassis Power is on
~ # ipmitool -H 127.0.0.1 -U admin -P admin power cycle
Chassis Power Control: Cycle
~ # POWER CYCLE CHASSIS
POWER OFF CHASSIS
POWER ON CHASSIS
[22313.320000] LPC RESET
PDK LPC Reset is invoked
Current fan number: 5
[22318.510000] LPC RESET
PDK LPC Reset is invoked
Current fan number: 5
[610 : 685 INFO]Power Consumption Mode Change Cmd:2147440117
[610 : 685 INFO]Power Consumption Mode Value Updated (0):
OEM storage.get_SEL_Timezone
[22370.210000] UsbConfigureHS(): USB Device 0 is running in High Speed
[22370.320000] HUB port 0 reset
[22370.320000] UsbConfigureHS(): USB Device 0 is running in High Speed
Starting to Read Current PostCode buffer...
Current Post Codes are ...
0x01 0x02 0x03 0x04 0x05 0x06 0x19 0xa1 0xa3 0xa3 0xa7 0xa9 0xa7 0xa7 0xa7 0xa8 0xa9
0xa9 0xaa 0xae 0xaf 0xe0 0xe1 0xe4 0xe3 0xe5 0xb0 0xb0 0xb1 0xb1 0xb4 0xb2 0xb3 0xb3
0xb3 0xb6 0xb6 0xb6 0xb6 0xb6 0xb6 0xb7 0xb7 0xbe 0xb7 0xb7 0xb7 0xb8 0xb8 0xb8 0xb8
0xb8 0xb8 0xb9 0xb9 0xba 0xb9 0xbb 0xbb 0xbb 0xbb 0xbb 0xbb 0xbb 0xbb 0xbb 0xbb 0xb7
0xbc 0xbc 0xbc 0xbc 0xbc 0xbf 0xe6 0xe7 0xe8 0xe9 0xeb 0xec 0xed 0xee 0x4f 0x61 0x9a
0x78 0x68 0x70 0x79 0xd1 0xd2 0xd4 0x91 0x92 0x94 0x94 0x94 0x94 0x94 0x94 0x94 0x94
0x94 0x94 0x94 0x94 0x94 0x94 0x95 0x96 0xef 0x92 0x92 0x92 0x99 0x91 0xd5 0x92 0x92
0x92 0x92 0x97 0x98 0x9d 0x9c 0xb4 0xb4 0xb4 0xb4 0xb4 0x92 0xa0 0xa2 0xa2 0xa2 0x99
0x92 0x92 0x92
[610 : 685 INFO]Power Consumption Mode Change Cmd:2147440116
7
82 Remote power cycle system