Install Guide
Table Of Contents
- Dell EMC VEP4600 Installation Guide
- About this guide
- VEP4600 platform
- Site preparations
- VEP4600 installation
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE standards
- Safety standards and compliance agency certifications
- Product recycling and disposal
- Agency compliance
- USA Federal Communications Commission statement
- Industry Canada Statement
- Brazil – Aviso da Anatel
- European Union EMC directive conformance statement
- Japan VCCI compliance for class A equipment
- Korean certification of compliance
- Mexico certification of compliance
- Taiwanese certification of compliance
- Thailand certification of compliance
- Singapore certification of compliance
- Dell EMC support
VEP4600 configurations
You can order the VEP4600 in the following configuration:
● Two 10GbE SFP+ and four 1000 Base-T ports, one or two AC PSU power supplies, and four or five normal fan subsystems
with airflow from the front to back, depending on the configuration.
NOTE: DC PSU optional configuration offered as a custom-kit. Simply contact a Dell Sales Representative.
○ Sixteen-core systems use five fans and two AC PSUs.
○ Eight-core systems use four fans one or two AC PSUs.
○
Four-core systems use four fans and one AC PSU.
Luggage tag
The VEP4600 has a pull-out tag, known as a luggage tag, on the I/O-side of the platform. The front of the luggage tag includes
platform ID information.
Figure 6. VEP4600 luggage tag
1.
SVC tag 2. MAC address
3. PPID 4. Express service code
12 VEP4600 platform