Install Guide
Table Of Contents
- Dell EMC VEP4600 Installation Guide
- About this guide
- VEP4600 platform
- Site preparations
- VEP4600 installation
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE standards
- Safety standards and compliance agency certifications
- Product recycling and disposal
- Agency compliance
- USA Federal Communications Commission statement
- Industry Canada Statement
- Brazil – Aviso da Anatel
- European Union EMC directive conformance statement
- Japan VCCI compliance for class A equipment
- Korean certification of compliance
- Mexico certification of compliance
- Taiwanese certification of compliance
- Thailand certification of compliance
- Singapore certification of compliance
- Dell EMC support
Table 8. AC power requirements
Parameter Specifications
AC power supply 100–240 VAC 50/60 Hz
Typical current draw per platform
● 110VAC: 1.89A (16 core) 240VAC: 0.86 A (16 core)
● 110VAC: 1.5A (8 core ) 240VAC: 0.7A (8 core)
● 110VAC: 1.35A (4 core) 240VAC: 0.65A (4 core)
Maximum power capability
● 5-fan 16-core processor: 311W
● 4-fan 8-core processor: 230W
● 4-fan 4-core processor: 220W
Typical power consumption
● 5-fan 16-core processor: 206.5W
● 4-fan 8-core processor: 170W
● 4-fan 4-core processor: 160W
Table 9. Expansion card AC power requirements
Parameter Specifications
Maximum power consumption* 0.9 Watt rNDC Carrier
Typical power consumption* 0.37 Watt rNDC Carrier
rNDC power can be found in their respective datasheets.
*For the most current power consumption specifications, see the Installation Guide at www.Dell.com/support.
IEEE standards
The VEP4600 platform complies with the following IEEE standards.
● 802.1ab (LLDP)
● 802.1ax (Layer 2)
● 802.1d, 802.1w, 802.1s, 802.1x (Mgmt/Security), 802.3x (Layer 2)
● 802.3 (1000BASE-KX)
Safety standards and compliance agency
certifications
● CUS UL 60950-1, 2nd Edition
● CSA 60950-1-03, 2nd Edition
● EN 60950-1, 2nd Edition
● EN 60825-1, 1st Edition
● EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification Requirements and User’s Guide
● EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems
● FDA Regulation 21CFR 1040.10 and 1040.11
● IEC 60950-1, 2nd Ed, including all National Deviations and Group Differences
● IEC 62368-1
Product recycling and disposal
You must recycle or discard this platform according to applicable local and national regulations. Dell EMC encourages owners
of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Dell EMC offers a
variety of product return programs and services in several countries to assist equipment owners in recycling their IT products.
34
Specifications