Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
VEP4600 configuration guidelines
Topics
● Types of VEP4600 with pre-installed OS from manufacturing
●
Guidelines for upgrading VEP4600 based on manufacturing configuration
This section describes the steps to take to complete the VEP4600 configuration. The VEP4600 will arrive from manufacturing
with one of the following configurations.
● Config1: VEP4600 preinstalled with ESXi
● Config2: VEP4600 preinstalled with DiagOS
● Config3: VEP4600 preinstalled with Versa flex NFV
Config1 – ESXi v6.7 Ux is installed on the VEP4600:
● Update firmware from the BMC - See Upgrade Firmware through BMC
Config2 – DiagOS is installed on the VEP4600:
● Update to the latest version of DiagOS - See Update to the latest version of DiagOS
● Update the firmware - See Upgrade Firmware through DiagOS
Config3 – Versa flex NFV is installed on the VEP4600:
● Update firmware from the BMC - See Upgrade Firmware through BMC
3
10 VEP4600 configuration guidelines